One install, decades of protection.
The weakest point of a pipe is the joint, and that is what Kampek protects. We supply Covalence, Stopaq and BG Industry corrosion protection and joint sealing systems to Finland's district heating, gas and oil networks.
The weakest point of a pipe is the joint. That is where corrosion starts.
Whether it is a district heating line, a gas pipe or an industrial process line, damage almost always starts at the joint or where the steel is left bare. Kampek supplies the protection for exactly those points. The product families split into two jobs.
Sealing the joint casing of pre-insulated district heating and cooling pipes. The joint stays dry, and the insulation stays dry for the service life of the pipe.
Covalence · BG IndustryProtecting buried and industrial lines against external corrosion. Self-healing protection for bare steel, applied cold without blasting.
Stopaq
Three product families from one warehouse.
Two jobs, three product families. Covalence and BG Industry for district heating and cooling joints, Stopaq for corrosion protection.
One install lasts the service life of the pipe in the ground.
The figures come straight from the manufacturer datasheets.
Figures from the Stopaq and Covalence manufacturer datasheets (Seal for Life).
What longer protection means for the network owner.
The same joint lasts longer in the ground and the work goes fast on site. The products ship from one warehouse in Tuusula.
Longer service life lowers lifecycle cost
When a joint lasts in the ground for the service life of the pipe, that spot does not need to be dug up and recoated as often as a traditional coating.
Fewer maintenance shutdowns
Stopaq's self-healing protection fills small defects by itself, so a single point of damage does not start corrosion under the coating or trigger an unplanned repair.
Faster installation on site
Stopaq is applied cold, with no blasting and no primer. Wire brushing to cleanliness grade St 2 is enough, and the work is feasible even in tight excavations.
The pipe can stay in service during the work
Stopaq's cold application without a torch means that on many sites the pipe can stay in service for the whole job.
Compatible with cathodic protection
Stopaq does not interfere with cathodic protection, so the coating and the cathodic protection work together on long buried transmission lines.
One supplier for the whole joint
You get Covalence, Stopaq and BG Industry from the same Tuusula warehouse. We match the right product combination to the site and deliver across Finland.
Built for the organisations that own, build and maintain the networks.
The products are made for the people accountable for a pipe network's service life. Energy companies, contractors and industrial asset owners get the same protection from the same warehouse in Tuusula, across Finland.
District heating & energy utilities
A leaking joint means the street is dug up and heat supply is interrupted. An EN-489-tested joint lasts the service life of the pipe in the ground and lowers the network's lifecycle cost.
EPC contractors
The products can be specified straight into the contract and installed fast. Covalence and BG Industry are type-tested to EN-489:2009, and Stopaq is applied cold without blasting.
Maintenance & rehabilitation
Stopaq is applied cold by hand, often on a pipe in service. Even a small quantity ships quickly from stock in Tuusula.
Municipal water & heat utilities
One warehouse serves both the district heating and water networks, and Stopaq Wrappingband holds NSF/ANSI 61 approval for drinking-water contact.
Industrial & energy asset owners
For refineries, process piping and gas and oil lines. On a critical line a failure costs many times the protection. Stopaq's self-healing protection works together with cathodic protection.
Where the products are used
District heating
EN‑489-compliant joint sealing for Finnish district heating networks
Industry and offshore
Stopaq corrosion protection for refineries, process piping and offshore structures
Gas pipelines
Gas pipeline sealing and corrosion protection, when the consequences of failure are different
Oil pipelines
Joint sealing and corrosion protection for oil distribution and process pipelines
Municipal water and heating
Joint sealing and corrosion protection for water and district heating networks
Every figure traces back to a manufacturer datasheet.
Seal for Life publishes Stopaq and Covalence references on its own pages. The links open on the manufacturer's site.
An importer you reach directly.
Certified systems
District heating joint products (Covalence and BG Industry) are tested to EN-489:2009, and Stopaq meets ISO 21809-3 and EN 12068. Every technical fact is on the manufacturer datasheet.
One warehouse, all of Finland
Warehouse in Tuusula, delivery across the country. The common items ship from stock.
A direct line
Reach Petteri and Mikko directly. Product advice and installation help by phone.
Questions and answers
What does Kampek sell?
How long does the protection last?
Which standards are the products certified to?
Is blasting required?
Can the protection be applied to a pipe that is in service?
Do you deliver across all of Finland?
Where do I get installation instructions?
Who are the products for?
Request a quote
Tell us briefly about the project type, pipe sizes, quantities and schedule. We reply within a few days. You can also call us directly: 040-502 9474